Global Technology Associates GBWA200501-01 User Manual Page 39

  • Download
  • Add to my manuals
  • Print
  • Page
    / 60
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 38
3 – Configuration 35
Run DHCP?
6c. IP Address
You will reach this option if you rejected use of dynamic IP address
services. Enter the static IP address and subnet mask of the exter
-
nal network interface.
The IP address for the external network interface should be a valid
ISP-registered IP address if you will be connecting your firewall to
the Internet.
7. Network Interface Card for the External, Protected Network or PSN
Select an available NIC to assign to the external interface. Use
F2
or the
SPACE BAR
to select from the device list. Each NIC detected
on your system is listed at the bottom of the screen with its MAC
address.
Note
All networks or sub-networks attached to a firewall interface should
be on logically different networks from one another.
Selecting a Network Interface Card
8. Protected Network Interface
Use steps 6b, 6c, and 7 to select DHCP and NIC or assign a
static IP address, subnet and NIC for the protected interface. (The
protected interface is required: it defines hosts protected by the
firewall.)
If you are setting up a new network, GTA recommends choosing
network addresses described in RFC 1918. The Internet Assign
-
Page view 38
1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 59 60

Comments to this Manuals

No comments